Click “Download Now” to get the Drivers Update Tool that comes with the ABIT KN9 SLI driver. The utility will automatically determine the right driver for your system as well as download and install the ABIT KN9 SLI driver. Being an easy-to-use utility, The Drivers Update Tool is a great alternative to manual installation, which has been recognized by many computer experts and computer magazines.
The tool contains only the latest versions of drivers provided by official manufacturers. It supports such operating systems as Windows 10, Windows 8 / 8.1, Windows 7 and Windows Vista (64/32 bit). To download and install the ABIT KN9 SLI driver manually, select the right option from the list below.
So I'm pretty much decided that I'm going to go for this Abit motherboard. I've downloaded the manual and I'll have a quick scan through it, but I was hoping someone with a bit more technical knowledge could just look over my components and see if they can spot any obvious problems with compatibility or whatever.
ABIT KN9 SLI Drivers. Hardware Name: KN9 SLI Device type: Mainboards File Size: 168.1MB Driver Version: 1 Manufactures: ABIT Software type: Bios Release Date: 30 May 2006 System: BIOS Wrong code!
. 6x SATA 3Gb/s with RAID 0/1/0+1/5/JBOD About this Manual: This user’s manual contains all the information you may ABIT Silent OTES™ Technology need for setting up this motherboard. To read the user’s manual of PDF format (readable by Adobe Reader), place the “Driver &. KN9 SLI, KN9 Ultra, KN9S User’s Manual English, 2 Edition July, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. 2.6.6 Front Panel Audio Connection Header.
2-19 2.6.7 PCI Express X1 Add-on Slots.2-21 2.6.8 PCI Add-on Slots. 2-22 2.7 Onboard Status Display. 2-22 2.7.1 Power Source Indicators. 2-22 2.8 Connecting I/O Devices. 2-23 KN9 SLI, KN9 Ultra, KN9S. 4.1 nVidia nForce Chipset Driver.4-2 4.2 Realtek HD Audio Driver.4-3 4.3 Cool’n’Quiet Driver.4-4 4.4 USB 2.0 Driver.4-5 4.5 ABIT EQ (The Hardware Doctor Utility).4-6 4.6 FlashMenu (BIOS Update Utility).4-8 4.7 NVRaid Floppy Disk.4-10 5. Appendix.5-1 5.1 Troubleshooting (How to Get Technical Support?).5-1.
1x Audio Connector (Surround-Left / Surround-Right, Rear-Left / Rear-Right, Center / Subwoofer, Mic-In, Line-In, Line-Out) 2x RJ-45 LAN ports 4x USB 2.0 ports ™ ABIT Engineered SoftMenu Technology ™ Silent OTES Technology Miscellaneous ATX form factor (305mm x 245mm) KN9 SLI, KN9 Ultra, KN9S. 1x Audio Connector (Surround-Left / Surround-Right, Rear-Left / Rear-Right, Center / Subwoofer, Mic-In, Line-In, Line-Out) 2x RJ-45 LAN ports 4x USB 2.0 ports ™ ABIT Engineered SoftMenu Technology ™ Silent OTES Technology Miscellaneous ATX form factor (305mm x 245mm) KN9 SLI, KN9 Ultra, KN9S. 1x RJ-45 LAN port 4x USB 2.0 ports ™ ABIT Engineered SoftMenu Technology ™ Silent OTES Technology Miscellaneous ATX form factor (305mm x 245mm) ※ Specifications and information contained herein are subject to change without notice. KN9 SLI, KN9 Ultra, KN9S. 1.2 Motherboard Layout 1.2.1 KN9 SLI KN9 SLI, KN9 Ultra, KN9S.
1.2.2 KN9 Ultra KN9 SLI, KN9 Ultra, KN9S. 1.2.3 KN9S KN9 SLI, KN9 Ultra, KN9S.
After doing this to all the slots, you can slide the board into position aligned with slots. After the board has been positioned, check to make sure everything is OK before putting the chassis back on. KN9 SLI, KN9 Ultra, KN9S.
(reserved for future use) will leave it at OPEN position. SHORT OPEN OPEN For 3-pin jumper, pin 12 or pin 23 can be shorted by plugging the jumper cap in.
Pin 12 SHORT Pin 23 SHORT KN9 SLI, KN9 Ultra, KN9S. For incorrect CPU ratio/clock settings in the BIOS, press key to enter the BIOS setup menu right after powering on system. Set the CPU operating speed back to its default or an appropriate value. Save and exit the BIOS setup menu.
KN9 SLI, KN9 Ultra, KN9S. ※ Danger of explosion may arise if the battery is incorrectly renewed. ※ Renew only with the same or equivalent type recommended by the battery manufacturer. ※ Dispose of used batteries according to the battery manufacturer’s instructions. KN9 SLI, KN9 Ultra, KN9S. Pin 1-2 shorted: Disable wake-up function support at FP-USB2 port.
Pin 2-3 shorted (Default): Enable wake-up function support at FP-USB2 port. FP-PWR3: Pin 1-2 shorted: Disable wake-up function support at FP-USB3 port. Pin 2-3 shorted (Default): Enable wake-up function support at FP-USB3 port.
KN9 SLI, KN9 Ultra, KN9S. This connector supplies power to CPU. The system will not start without connecting power to this one.
Auxiliary 12V Power Connector: (For model “KN9 SLI” only) This connector provides an auxiliary power source for devices added on PCI Express slots. KN9 SLI, KN9 Ultra, KN9S. Connects to the Suspend LED cable (if there is one) of chassis front panel. PWR (Pin 6, 8): Connects to the Power Switch cable of chassis front panel. PLED (Pin 16, 18, 20): Connects to the Power LED cable of chassis front panel.
KN9 SLI, KN9 Ultra, KN9S. These connectors each provide power to the cooling fans installed in your system.
CPUFAN1: CPU Fan Power Connector. SYSFAN1: System Fan Power Connector. AUXFAN12: Auxiliary Fan Power Connector ※ These fan connectors are not jumpers.
DO NOT place jumper caps on these connectors. KN9 SLI, KN9 Ultra, KN9S. The heatsink for CPU may have thermal interface material attached bottom. If not, applying a few squeeze of thermal paste to the CPU die will help to increase the contact. KN9 SLI, KN9 Ultra, KN9S.
![]()
※ A higher fan speed will be helpful for better airflow and heat-dissipation. Nevertheless, stay alert to touch any heatsink since the high temperature generated by the working system is still possible. 2-10 KN9 SLI, KN9 Ultra, KN9S. DIMM3 and DIMM4 are made of another same color. Usually there is no hardware or BIOS setup requires after adding or removing memory modules, but you will have to clear the CMOS memory first if any memory module related problem occurs. KN9 SLI, KN9 Ultra, KN9S 2-11. DIMM module.
※ Static electricity can damage the electronic components of the computer or optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly.
2-12 KN9 SLI, KN9 Ultra, KN9S. Two PCIE graphics cards installation (SLI Mode): (For model “KN9 SLI” only) Insert 2 identical SLI-ready graphics cards into PCIEXP1 and PCIEXP2 slots. ※ The NVIDIA SLI technology currently supports the Windows XP operating system only. KN9 SLI, KN9 Ultra, KN9S 2-13. Insert the two graphics cards into PCIEXP1 and PCIEXP2 slots on the motherboard.
There are goldfingers on your SLI Graphics Cards reserved for the SLI Bridge Connector. Locate the SLI Bridge Connector in the package. 2-14 KN9 SLI, KN9 Ultra, KN9S. SLI bridge connector and the two SLI graphics cards. Insert the SLI bracket into the bracket slot between the graphics cards. Secure the SLI bracket and the graphics cards to the chassis with screws.
KN9 SLI, KN9 Ultra, KN9S 2-15. ※ Make sure to configure the “Master” and “Slave” relation before connecting two drives by one single ribbon cable. The red line on the ribbon cable must be aligned with pin-1 on both the IDE port and the hard-drive connector. 2-16 KN9 SLI, KN9 Ultra, KN9S. Attach either end of the signal cable to the SATA connector on motherboard. Attach the other end to SATA device. Attach the SATA power cable to the SATA device and connect the other end from the power supply.
KN9 SLI, KN9 Ultra, KN9S 2-17. ※ The IEEE1394 Port Headers are available only for models “KN9 SLI” and “KN9 Ultra”. Pin Assignment Pin Assignment TPA0 + TPA0 - Ground Ground TPB0 + TPB0 - +12V +12V Ground ※ Make sure the connecting cable bears the same pin assignment. 2-18 KN9 SLI, KN9 Ultra, KN9S. Pin 4 “AVCC” of this header. Pin Assignment Pin Assignment (HD AUDIO) (AC’97 AUDIO) MIC2 L MIC In AGND MIC2 R MIC Power AVCC FRO-R Line Out (R) MIC2JD FIOSEN FRO-L Line Out (L) LINE2JD KN9 SLI, KN9 Ultra, KN9S 2-19. Right-click the “Realtek HD Audio Manager” icon in system tray.
![]()
Click “Audio I/O” tab, and then click “Connector Settings”. Click “Disabled front panel jack detection”, and then click “OK” to confirm. 2-20 KN9 SLI, KN9 Ultra, KN9S. 2.6.7 PCI Express X1 Add-on Slots These slots provide the connection of add-on cards that comply with PCI Express specifications. KN9 SLI: PCIE1 PCIE2 KN9 Ultra, KN9S: PCIE1 PCIE3 KN9 SLI, KN9 Ultra, KN9S 2-21. These indicators work as a reminding device to display the power status of this motherboard with power source connected.
5VSB: This LED lights up when the power supply is connected with power source. VCC: This LED lights up when the system power is on. 2-22 KN9 SLI, KN9 Ultra, KN9S. 7.1 channel audio system. (Rear Left / Rear Right): Connects to the rear left and rear right channel in the 7.1 channel audio system.
Line-In: Connects to the line out from external audio sources. KN9 SLI, KN9 Ultra, KN9S 2-23. LAN2: Connects to Local Area Network. (For model “KN9 SLI” and “KN9 Ultra” only). USB1/USB2: Connects to USB devices such as scanner, digital speakers, monitor, mouse, keyboard, hub, digital camera, joystick etc. 2-24 KN9 SLI, KN9 Ultra, KN9S. ※ In order to increase system stability and performance, our engineering staff is constantly improving the BIOS menu.
The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen. KN9 SLI, KN9 Ultra, KN9S. ※ There will be no guaranty for the settings beyond specification. Any damage of any component on this motherboard or peripherals resulting therein is not our responsibility. KN9 SLI, KN9 Ultra, KN9S. The option “User Define” enables you to select the following voltages manually. CPU Core Voltage DDR2 RAM Voltage DDR2 Ref Voltage MCP55P Voltage HyperTransport Voltage KN9 SLI, KN9 Ultra, KN9S.
This item sets the date you specify (usually the current date) in the format of Month, Date, and Year. Time (hh:mm:ss) This item sets the time you specify (usually the current time) in the format of Hour, Minute, and Second. KN9 SLI, KN9 Ultra, KN9S.
This item displays the approximate capacity of the disk drive. Usually the size is slightly greater than the size of a formatted disk given by a disk-checking program. Cylinder This item configures the number of cylinders. Head This item configures the number of read/write heads. KN9 SLI, KN9 Ultra, KN9S. 640K for system with 640K or more memory size installed on the motherboard.
Extended Memory This item displays the amount of extended memory detected during system boot-up. Total Memory This item displays the total memory available in the system.
KN9 SLI, KN9 Ultra, KN9S. Enabled, if the BIOS detects no floppy drive, it will display a floppy disk drive error message. If this item is disabled, the BIOS will skip this test. The default setting is Disabled. KN9 SLI, KN9 Ultra, KN9S. A larger value will give more delay time to the device for which to initialize and to prepare for activation. Full Screen LOGO Show This item determines if the full screen logo is shown when booting.
KN9 SLI, KN9 Ultra, KN9S. F6: Fail-Safe Defaults F7: Optimized Defaults K8MCP55 HT Speed This item selects the LDT Bus Frequency between CPU and MCP55 Chipset. K8MCP55 HT Width This item selects the LDT Bus Width between CPU and MCP55 Chipset. KN9 SLI, KN9 Ultra, KN9S. This item allows you to Enable or Disable the SSE/SSE2 (Streaming SIMD Extensions) instruction set. Init Display First This item selects which display slot to initialize first when the system boots. System BIOS Cacheable This item enables or disables caching the system BIOS for faster execution.
3-10 KN9 SLI, KN9 Ultra, KN9S. Phoenix – AwardBIOS CMOS Setup Utility On-Chip IDE/RAID Function ► IDE Function Setup Press Enter Item Help ► RAID Configuration Press Enter ↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults KN9 SLI, KN9 Ultra, KN9S 3-11. This item selects the DMA mode for devices connected through IDE channels. IDE HDD Block Mode This item enables or disables the IDE HDD Block Mode. On-Chip SATA Controllers This item enables or disables the on-chip SATA controller. 3-12 KN9 SLI, KN9 Ultra, KN9S.
Support” and “USB Mouse Support” items will not be available to select in Integrated Peripherals menu. USB Keyboard Support via Select BIOS for the legacy operating system (such as DOS) that does not support USB keyboard. KN9 SLI, KN9 Ultra, KN9S 3-13. Onboard 1394 Controller: This option enables or disables the IEEE 1394 controller. Onboard FDD Controller Two options are available: Enabled and Disabled. The default setting is Enabled. You can enable or disable the onboard FDD controller.
3-14 KN9 SLI, KN9 Ultra, KN9S. Wake up by PME# of PCI When set to Enabled, access through the add-on PCI card can remotely wake up the system that was in Soft-Off condition.
The PCI card must support the wake up function. KN9 SLI, KN9 Ultra, KN9S 3-15.
If the specs of your keyboard are too old, it may fail to power on. KB Power ON Password This item sets the password required in order to power on your computer. 3-16 KN9 SLI, KN9 Ultra, KN9S. If the system’s power is off when AC power failure occurs, it will remain off when power returns.
If the system’s power is on when AC power failure occurs, the system will power-on when power returns. KN9 SLI, KN9 Ultra, KN9S 3-17.
F7: Optimized Defaults Resources Controlled By This item configures all of the boot and Plug-and-Play compatible devices. Auto(ESCD): The system will automatically detect the settings. Manual: Choose the specific IRQ resources in the “IRQ Resources” menu. 3-18 KN9 SLI, KN9 Ultra, KN9S. Disabled: MPEG ISA/VESA VGA cards do not work with PCI/VGA. Enabled: MPEG ISA/VESA VGA cards work with PCI/VGA. Maximum Payload Size This item sets the maximum TLP payload size for the PCI Express devices.
KN9 SLI, KN9 Ultra, KN9S 3-19. This item allows you to control the CPU fan speed.
When set to enabled, the following items become selectable. FanEQ Target Temperature This item allows you to set a wanted temperature for the CPU. Tolerance This item sets the high/low limits of the target temperature. 3-20 KN9 SLI, KN9 Ultra, KN9S. This option protects the BIOS configuration or restricts access to the computer itself. 3.12 Save & Exit Setup This option saves your selections and exits the BIOS setup menu. 3.13 Exit Without Saving This option exits the BIOS setup menu without saving any changes.
KN9 SLI, KN9 Ultra, KN9S 3-21. 3-22 KN9 SLI, KN9 Ultra, KN9S. Utility: Click to enter the utilities installation menu.
ABIT Utility: Click on this tab to enter the menu for installing utilities exclusively developed by ABIT. Browse CD: Click to browse the contents of this “Driver & Utility CD”. Click the nVidia nForce Chipset Driver item. The following screen appears: Follow the prompts on the screen to complete installation. Restart the system for the driver to take effect.
※ Please install this nVidia nForce Chipset Driver first after having installed the Windows operating system. KN9 SLI, KN9 Ultra, KN9S. Click on the Drivers tab in the installation menu screen. Click the Realtek HD Audio Driver item. The following screen appears: Follow the prompts on the screen to complete installation. Restart the system for the driver to take effect. KN9 SLI, KN9 Ultra, KN9S.
Click on the Drivers tab in the installation menu screen. Click the Cool’n’Quiet Driver item. The following screen appears: Follow the prompts on the screen to complete installation. Restart the system for the driver to take effect. KN9 SLI, KN9 Ultra, KN9S. This must be set to “Automatic Mode” for Cool ‘n’ Quiet to be enabled. 4.4 USB 2.0 Driver ※ There is no need to install this driver for Windows 2000 with Service Pack 4, Windows XP with Service Pack 1, or their later version.
KN9 SLI, KN9 Ultra, KN9S. 4.5 ABIT EQ (The Hardware Doctor Utility) ABIT EQ is a self-diagnostic system for PC based on motherboards designed and manufactured by ABIT Computer Corporation.
It will protect PC Hardware by monitoring critical items of Power Supply Voltage, CPU & System Fans Speed, and CPU & System Temperature. Execute the ABIT EQ by entering the Windows Menu Start All Programs ABIT ABIT EQ. ABIT EQ shows you the status of Voltage, Fan Speed, and Temperature readings as well. KN9 SLI, KN9 Ultra, KN9S. 4.6 FlashMenu (BIOS Update Utility) ABIT FlashMenu is the most stable Windows-based BIOS flash available. No more worries from crashing. With one click of BIOS updating, ABIT users can flash their BIOS more easily and in less time.
To install this utility: Click on the ABIT Utility tab in the installation menu screen. Execute the FlashMenu by entering the Windows Menu Start All Programs ABIT FlashMenu. This FlashMenu screen appears. You can easily update the BIOS from clicking Update From File, One Click LiveUpdate, or LiveUpdate Step by Step button. KN9 SLI, KN9 Ultra, KN9S. Floppy Disk to create another one. To install this utility: Click on the ABIT Utility tab in the installation menu screen.
Click the Generate NVRaid Floppy Disk item. The following screen appears: Insert one blank floppy disk to the selected floppy drive and click Build. Close the chassis and switch on the power supply unit or plug in the power cord. Press the power-on button to boot up system. If it works, hit key to enter the BIOS setup page to do the correct settings. If the situation remains the same, try Step 3. KN9 SLI, KN9 Ultra, KN9S.
Motherboard: Type in the model name and revision number of your motherboard. Example: AA8XE REV: 1.00. BIOS Version: Type in the BIOS version of your motherboard. (You can find it on the screen during the POST sequence.) KN9 SLI, KN9 Ultra, KN9S.
Is the motherboard dead? Do I need to return it to where I bought from or go through an RMA process? A: After you had gone through the troubleshooting procedures, yet the problem still exists, or you find an evident damage on the motherboard. Please contact our RMA center. (KN9 SLI, KN9 Ultra, KN9S. First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply wattage: Storage devices: Optical devices: Other devices: Operating system: Problem description: KN9 SLI, KN9 Ultra, KN9S.
Universal ABIT Russia (Rep. Office) Switzerland Contact: [email protected] Universal ABIT NL B.V. Website: www.abit.ru Jan van Riebeeckweg 15, 5928LG, Venlo, The Netherlands Turkey Tel: 428 Fax: 420 Universal ABIT Turkey (Rep.
Office) Tel: 90 532 211 6860 KN9 SLI, KN9 Ultra, KN9S. P/N: 4310-0000-26 Rev.
Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |